Able Archer/ RFR rules - Vietnam in 20mm (part 10) - First battalions of Vietcong Local Force

 

The Vietcong was organized in two main forces for the wargames table, the Main force, generally the best equipped and that you can see in a previous post, and the Local Force, not as well equipped as it was made of local inhabitants that had to conceal their weapons all the time and dressed mostly in civilian clothes. I made the battalions of VC Local force with six figures per company and only with one mortar per battalion. The figures Orion and Esci (the guys in shorts and the ones with a soft hat with a peak and AK47). 

The left stand had a moon shaped piece of wood glued to the main round base in order to make the prone figure sit more comfortably. The figure with the AK47 and soft "Khmer Rouge" hat was transformed into the woven straw conical hat with the help of Milliput.

The mortars were scratchbuilt as I have very few left. The figures holding cargo in the Local Force Orion box were converted into mortar crews. 

Next: More Vietnam, probably Tango boats or M-113s. 

Able Archer/ RFR rules - Vietnam in 20mm (part 9) - A PBR and a few more US tanks

 

Just a short one for some new goodies. The PBR is a 3d resin print from Frontline Collection Store that you can get from Aliexpress, the M48A3 is MiniGeneral 3d PLA print and the Sheridan is Airfix. 

The PBR boat (of Apocalipse Now fame) is a beautiful, extremely detailed and well packed 3d resin printed model. Some parts are a bit fragile but a strong base around it solve most of those problems. A number of surplus guns and crew were left aside as they will be helpful somewhere else. 

Its not a cheap thing at around 30 euros but surely its a quality model.

The Sheridan tank got the 11th ACR markings as its the US unit I´m trying to make, it has virtually everything you need for ground US forces: the infantry; the M113 ACAV and other variants; the M48A3, the Sheridan and the M109 together with Huey support. 

The Airfix Sheridan is quite basic but with a number of additions it becomes a reasonable model. Years ago I converted a number of them for Kuweit 1991 with 82nd Airborne colors. The wire mesh at the front are 3d resin printed leftovers. 

This M48 is in fact the A2 variant with a lower engine. In order for it to look taller I used plenty of stowage on the engine deck. Apart from this an Airfix M2 Browning was drilled in the top cuppola of the turret. The 1st tank company of three M48s is done. 

Next: The Vietcong Local Force battalions