Borodino 1812 (part 7): 1st Russian Grenadier infantry division and Cuirassiers for AOE in 20mm

The 1st Grenadier division is famous among modellers due to the famous mitre caps of the Pavlov regiment. In fact I have all three regiments (each regiment representing one brigade in AoE terms) with mitre caps which is only good only up to 1805, the grenadiers transitioning to the Kiwer with large plume then. The only exception is the obvious Pavlov regiment which was allowed to keep their treasured mitres up to the end of the Napoleonic wars due to their bravery at Austerlitz. Well, then two of the regiments - Tauride and Saint Petersburg - are not much "Borodino" like but this is due to my eagerness and usual exaggeration in having bought three boxes of the Italeri grenadiers, simply because they were on the shelves, when apparently only one was necessary. Even so, I'm really thinking about using my Borodino Russians for all Napoleonic campaigns as I doubt that I will start a Russian army all over again just because of a different shako before 1812.  Besides, there would be a few more dozen of figures placed somewhere and without destiny, something that at 55 yo I´m trying to avoid, as its my wish/dream to finish the stash one day. That is, if the mailman lets! 

The Jägers are the usual Esci with a few Revell and StreletsR in the middle. 

This is the only true Borodino type regiment of this Grenadier lot. The Pavlov regiment is made of Italeri Grenadiers and a Zvezda officer with Kiwer. 

The cloth of the back part of the mitres are slightly different from regiment to regiment with white, blue and red color in the horizontal part. 

The officers were converted to bicorne hats using bicorne heads enlarged with GreenStuff. The standard bearers were also converted from some marching and standing Italeri figures. 

The Czar Cuirassier Regiment, representing Borosdin Brigade, is made of Hat figures with a converted standard bearer. The flag was hand painted as I could not find a printed one. 

As usual I painted one more farm from Mário Laranja's gifts. My main idea continues to be the Austrian farms and houses for the Wagram campaign but I kept it on the generic side so they can be used in many scenarios and ages. 

This farm is made of two different parts with the right part detachable and capable of being positioned against any other wall of another farm. 

The trick is leaving a bit a bit of wall out of the base, which gives plenty of possible variations to this annex. 

Next: more Borodino Russians, or eventually Gallipoli,  but only in September due to holidays. 

The Alamo 1836 and its opposing armies in 20mm

This is one of the most famous episodes of the history of North America portrayed many times in cinema, comics and novels. I made all this around the release of the 2004 movie with the help of the Imex series of the period made a few years before. The Alamo was built using mostly hard styrofoam with details in card, plastics and whatever was suitable. The derelict state of the former Spanish mission was a big help as you don't need too much measurements and planning. The armies, both Texans and Mexicans were made with the already mentioned Imex but also with scores of Napoleonic and cowboy figures of all available brands of those days, like Airfix, Esci, Revell and Italeri.

RFR/Able Archer - The Israeli army for the Lebanon campaign of 1982 in 1...

First of all a big thank you to Neil Patterson for reminding me of CMSC and its history, as I forgot the name of this lovely brand in my Syrian army video. Also the "Fabbri" and other nonsense I said in this and the previous video about mystery resin and metal "collectibles" were in fact 1/87th scale Salvat models, as I checked in old posts from my blog. Fortunately I keep on finding them in flea markets and 2nd hand shops. Again you can see plenty of Roco Miniatures (1/87th scale) together with Peter Pig and QRF (1/100th). Some of the M60 MBT are Chinese toy models, and after covering them in ERA they play the part very well and are almost as good as the Roco or Salvat models. The infantry are whether Atlantic plastics or Peter Pig. The Aircraft are all 1/100th scale from Tamiya, Fabbri diecast and Revell.

Borodino 1812 (part 6): Russian Guards infantry division for AOE in 20mm

Lavrov´s division advances stands firm on the Borodino field next to an irrigation ditch. The Guard division is probably the most famous of the Russian army. The first line (brigade in AOE) is made of Jägers, here represented by Finnish Jägers; the second is Udom´s Brigade with the Lithuanian Regiment representing it and the third line has the Semionovski Regiment representing Rosen´s Brigade. 

The Finnish Jägers are the usual Esci figures with a StreletsR officer. 

The two Guard regiments of the line are mostly Zvezda and the two flag bearers have the trick of the extended pole with the top part cut and added later when the paper flag is inserted. 

The three boxes I had of Grenadiers already flew with just a few units as this thing of placing 6 figures in each stand is eating lots of miniatures! The flag bearer to the right was an improvised Italeri Prussian with added paper flag and plume. 

I also got tricked by the rear view of the Zvezda Grenadier box as it shows 18 marching figures which convinced me that, plus the command stand, three boxes would be enough to portray a full regiment of 60 marching figures. In fact one of the attacking poses is missing on the rear view of the box and somehow a marching figure shows up instead. This forced me to use other figures in the rear rank, namely more Prussians from Italeri. All of them got the usual plumes (inserted broom stick in the shako covered in GreenStuff) and painted cords. As they are big figures they make good looking Guards that were taller than most regular infantryman (minimum 1,71m for the Guards to 1,55m in the regulars).

The Divisional command stand has two Italeri Prussians from two different boxes (infantry and staff). The foot officer got a plume and entered easily to the Guard while the mounted officer started his life as an ADC. The horse came from the Revell Heavy Dragoons with its tail enlarged with GreenStuff. 

The General's coat tail was also enlarged and the shabraque was changed to the intended form, again with the help of GreenStuff, that marvellous invention ... let me google it... from Kneadatite (... never heard this before!). 

Next: A video on the Israelis in Lebanon 1982

RFR/Able Archer - The Syrian army for the Lebanon campaign of 1982 in 15...

This another old army that still gets some new models from time to time. It includes three famous units of the Syrian army: the 1st armoured division (of Sultan Yacoub fame); the 3rd armoured division (with the first T-72s to see combat) and the 85th infantry brigade (which defended Beyrouth during the campaign). This post also includes the Syrian air force and the AA army assets that were the target of the Israeli Mole Cricket 19 operation.

The American army at Brandywine 1777 in 20mm

This is the second part of the Brandywine series, after the British army video. It's still a bit incomplete but you can see the way an American independence army can be made using 20mm plastics. The usual Airfix, Revell, Italeri, Accurate and PSC gaming pieces makes the bulk of this one with the also usual conversions, specially in the making of round hats which are rare in 20mm plastics.

Borodino 1812 (part 5): Russian 7th infantry division for AOE in 20mm

 

The 7th infantry division of General Peter Kapsevich is represented here in AOE term by the Moskow and Libava regiments. The only  divisional Jäger regiment present at Borodino was the the 36th hence only three stands for the Jägers instead of the usual six. The figures are the usual Zvezda for the grenadiers, Revell Prussian for the musketeers and Esci for the Jägers. 

The command stands of each regiment (brigade in AOE terms) are from the StreletsR Russian and Prussian chiefs of staff. Some Revell musketeers were also converted as flag bearers. 

The command divisional stand is made of two Prussian officers of the Italeri box of British and Prussian staff. Much has been said about these Italeri boxes. They started in great shape with a fantastic box of French Staff that includes ADCs, Generals, Chasseur bodyguards, Roustam and Napoleon itself. After leaving us salivating, Italeri ruined everything and the two next staff boxes only offering us half a dozen new figures each, very beautiful though and that includes Wellington, and plenty of figures from other already existing sets. Its an obvious disappointment as the new figures becomes more expensive than metal ones. So in a way to take the maximum advantage of the Prussian staff figures I painted them as Russians as their officers also used this peaked cap and the same uniform cut (the Prussians copied the Russian uniform in 1813). If you forget that Kutusov was much older and fat you can use the mounted figure as this famous general even by painting its cap white as he used one at Borodino. 

Next: Russian Guard Infantry for Borodino. 

Borodino 1812 (part 4): Uvarov´s Guard Cavalry division for AOE in 20mm

General Uvarov´s Guard Cavalry Division is preparing itself for the famous right flanking maneuver at Borodino.  

These Guard Uhlans are the Russian Uhlans of Strelets that I had for years in the stash. As all Uhlans are virtually the same in all Napoleonic armies this group was close to finish his life painted as Austrian or French but ended up in the uniforms and colors they were supposed to have. The figures are rare, I suppose, as they are some of the oldest models Strelets produced back in 2003. The lances were replaced by broom sticks and paper pennants. After painting and gloss varnishing the paper looks like plastic. 

The Guard Cossacks are the obvious Zvezda in their generous box containing 15 of these beauties. Due to the need of 16 figures I was forced to open a second box with the remaining figures becoming Bug Cossacks in the future. 

Again Zvezda for the Elisabethgrad Hussar Regiment, a detached regiment to the Guard division. 

Uvarov´s Divisional stand was not easy to make as I couldn't find other portraits of the man but the more famous ones with a bit too fancy uniforms ( we call it here "clothes to visit godmother").  So my inspiration came from the Uvurov's Perry figure in 28mm on their website. The other figure pretends to be a messenger from Elisabethgrad Hussar regiment. 

Uvarov started his new life as the figure of  Prussian King Friedrich-Wilhelm III but with the addition of some GreenStuff he quickly exchanged his Germanic origins for Slavic ones. 

 Both figures are Strelets and the horses are Revell from the British Dragoons box. With a bit of GreenStuff the shabraque can be turned into whatever model you want. 

One more beautiful farm by Mário Laranja made of card strengthened with Super Glue. My only work was the painting which is really easy due to the detail that Mário puts into the models. 

Next: More Russian Infantry for Borodino  

Borodino 1812 (part 3): The Russian artillery for AOE in 20mm

 

This is the result of the two magnificent boxes of Zvezda Russian artillery. After finishing all this, besides the absolute beautiful models, you still have close to 40 artillerymen that you can use to man some 10 surplus artillery pieces you may have around. So, one of the best buyings around on the plastic market you can find . 

In the backdrop you can see one more of the great Mário Laranja group of houses painted along this group of Zvezda models. 

On the Guard artillery box the limber doesn't have horses or drivers (you can find them on the other box) and these were sorted out in my usual scratchbuilding way.

Horses and drivers are not the same scale (1/76th and 1/72nd respectively) but it doesn't look that bad.  

The horses are Airfix (French artillery for the right side and Scottish mounted officer for the right). The driver´s horses got some extra harness; the drivers are Italeri Scots Grey with Zvezda heads and the ropes are pieces of wire. 

The limber and ammunition caisson are simple marvels of plastic engineering. 

The foot artillery... 

...and the guard artillery. Both boxes also give different figures if you want to place the crew pulling the gun. All these figures will be used, as said, for new gun crews but also as line infantry drummers and converted flag bearers. 

Next: Russian cavalry for Borodino.  

Borodino 1812 (part 2): The Russian High Command Stands for AOE in 20mm

Some 20 years ago I found in a local shop, nonexistent nowadays as many of its kind, the StreletsR box of Russian and Prussian chiefs of staff in that old style of them of 48 different figures. As the project of late Prussians in 20mm was replaced by the same in 28mm, all figures - Russian and Prussian - are going to be useful as Borodino Russians. In fact a few of them, with minimal conversions were already recruited for the French Armée du Portugal. 

Here you can see Kutusov itself, close to the famous drum (on the other side of the ridge Napoleon is also resting his left leg on a drum at least according to the famous portrait of Vasily Vereshchagin). To his right I used the model of the Tsar Alexander I itself, which wasn´t at the battle but had to be used somewhere. To the left of Kutusov I used other figures from the box including the Prussian General Von Wartenburg. All figures are StreletsR with a Revell horse and Esci horse holder (that figure that Esci loved of a bayonetting infantryman). 

Now the stands of the 1st Army of the West (right, Barclay de Tolly) and 2nd Army of the West (left, Bagration). The bases are progressively smaller and with less figures from the Kutusov stand to the divisional commander's stands. The Bagration stand is all StreletsR again with Revell and and Esci  horse holder. Barclay de Tolly´s stand is Italeri with cavalry General Depreradovich to the far right. The Italeri Russian and Austrian staff is a true pity; only six figures are original and the rest are Austrian infantrymen and Pavlov Grenadiers from already existing references. 

These Corps command stands are generic and you can see both on left and right the Revell Prussian officer on horse converted with a large bicorne. The two cossacks from the right represent a wounded dispatch rider delivering its message. 

 

As some heads were already gone some bicornes had to be scratchbuilt. The staff officer to the left is the gigantic Italeri late Prussian. 

The divisional command stands will have to be some twenty and this one is a taster made from the Revell late Prussians.

Along side these stands another fantastic farm from Mário Laranja was painted. 

Once again it tends to be generic but with the Napoleonic wars in mind. Everything is card strengthened with liquid cyanocrylate, less the tree which belonged to my dear father´s HO train collection. 

Next: more Borodino Russians, first artillery and then cavalry.