Able Archer/ RFR rules - Vietnam in 20mm (part 13) - Reinforcements for the 11th ACR and some more aircraft

 

Some 11th Armored Cavalry Regiment (ACR) elements advance in the middle of My Blue province when they are surprised by a low flight of some friendly aircraft, that could well have been some Migs... Well, this event was not registred in the unit´s history and its presented here first hand. 

Each squadron of the 11th ACR had three rifle squads (one per troop) transported in M-113 A1. I read that even these ones could also have the ACAV version but the regiment will end up with nine of these so three of the more plain A1 version looks OK. I´m not sure about placing a simple shield in front of the 12,5mm gun but I still couldn´t find a photo of them like this, the ACAV version being the more common. All models are quick build S-Model.

The figures are left-to-right, Skytrex and Airfix modern fighter pilots which suit the US cavalry tank helmet pretty well. 

Each troop also had a M-106 mortar carrier. I used again the S-Model for this conversion using a M-106 from Esci as a template. Bits of different types of plastic were used and even the mortar base came from a Revell 7YW Austrian artillery wheel. 

The crew is Esci and the M-16 rifles were cut until looking like a 107mm mortar shell. Later, the rifle part/shells were smoothed with a bit of  thick acrylic paint. 

As the mortar base was very brittle (old Revell style) I placed a jerrycan covering the damaged part. 

The floor of the M-106 (light sand part) was also raised so the figures and mortar could sit correctly. 

The Cadillac V-100, mostly used by the Military Police, are very old Corgi Juniors toys. The size is around 20mm as I have a number of Saudi V-150 in 1/87th scale that are smaller. 

The resin figures are surplus from the 3d printed PBR boat and the metal figure is Skytrex. 

The Huey Gunship is Revell. 

The Mohawk is the old Hasegawa model. One of these slow moving aircraft managed to put down a Mig-17 with its rockets, something that was kept as a secret up to 2007, as the army didn´t want USAF to know about this feat and force the Army to disarm its Mohawk as putting down Migs was a USAF exclusive. 

This A-4 Skyhawk F is the old Frog in Israeli colors. All these three aircraft got new star and stripes decals from the decals left-over box and all other symbols were hand painted. This one looks particularly bad as the symbold are painted on top of the grey primer as its (just by chance) the same color and painting style of another Skyhawk C from Altaya that I showed you before. 

Next: Guadalcanal models or a video on Bodrum, Gettysburg or Tarawa. 

Able Archer/ RFR rules - Vietnam in 20mm (part 12) - Armored vehicles for both sides

 

In this FOW style picture, were tanks point at point blank range to each other as if coming from holes on the ground, you have the two missing Sheridans, 2/3 of the necessary M113 ACAVs (both types of models for the 11th ACR), a M42 Duster, just because it was on the stash, and the first few T-34 and T-54 for the NVA. 

The ACAVs are Eskice, printed in Germany by Tom Hobby. I continue to be amazed by these resin 3d printed models as this, for instance, has two pieces, one being the 12,7mm HMG turret, with gun and figure, and the other, well, all the rest, including figures...

I already had some Eskice in the form of six German WW2 side-cars and enjoyed painting them a lot even if they have big heads which doesn´t make them good neighbors for most other brands, exceptuating the sort of the old Britannia metal figures. 

With three more, the full ACAV numbers will be achieved for the 11th ACR. 

Only a few jerrycans, antennas and some stowage was added. 

I made a small raid into the box were I have the 1st group of 4D models. They are around 30 (some 1/72ish, others 1/87th scale) and, if I can remember well I could only use some 4-5 of them (heavily converted, though) as they are toys and not real models, with the bottom part, including wheels, being all the same throughout the collection. The M42 Duster is no exception. But by looking at a comparison on the web between the Altaya and the 4D M42 Duster, I realised the top part of the 4D model is quite reasonable. 

What the 4D model mostly needs is some new wheels that came from derelict Hasegawa M24 Chaffees, glued against a piece of thin cardboard as they needed to be a bit far from the bottom part, which is the same on all 1st series 4D models. Then some crew, stowage, antennas and a HMG were added. 

The Atlantic crew figures lost their heads  as they were too small and were replaced by Hasegawa pilot´s. 

The Sheridan to the left is Airfix and the other is Altaya. They got the same treatment as the first I made a few weeks ago. Now there is one per squadron for the 11th ACR, which is the intended number. 

For painting all these vehicles I followed my first Altaya Vietnam models procedure: the Altaya Vietnam models (Gun Truck, M41 Bulldog and M48A3) came painted in olive brown with the usual sheen of Altaya vehicles; in order to break that sheen I slightly sprayed Krylon's Panama Khaki, which is something I continue to do with all models from other brands for this theater (the olive brown used is Vallejo). In period pictures, Vietnam models are many times covered in mud due to the rainy seasons. This in fact saves two moments of painting, the black wash (which needs a few hours here - days, in England, he,he) and the main color + white drybrushing. 

Finally a few NVA tanks. The T-54 are 4D models and are a big improvement from the first batch they made, from were the M42 Duster comes. I already made a few of these T-54 for the Angolans and knew how good and easy to build these models are. The T-34 is Polistil, and together with the Airfix Sheridan belong to a small batch of models found in the last month´s flea market at Tomar. Next week I plan to be there again for some extra old findings.

Next: wether Vietnam or WW2 aircraft. Guadalcanal is also close. 

Able Archer / RFR rules - Last haul from a 2nd hand fair

 

One of my biggest pleasures, exceptuating the ones were small people are made (or not), is to find old kits that remind me of my childhood. And I think this craze is increasing with the end of the  old style  model shops. So last month I had  news from one of my down town informers (can´t say his name), the one that sells my mother Corin Tellado books, that in Tomar, a city some 70 km from Coimbra (as a side note, Coimbra is still the capital of Portugal, as there is no document of any transfer of capital to Lisbon) a guy nicknamed Zé Manco (Joseph Lame, in english) was selling a large quantity of old plastic models at the 2nd hand fair of Tomar, on the first sunday of each month. So there I was looking for the guy on that day. Not easy as the fair is huge, but I saw a lame guy moving with some difficulty and I was sure to have found my target. 

Among plenty of others, I found these 5 old treasures in perfect conditions:

- The Lancaster will go along with the Revell one I showed a month or so ago just because two is much better than one

- The Sheridan will go to my 11th Black Horse Regiment in Vietnam

- The T-34/85 (had no idea that Polistil made 1/72nd models) with go to the NVA

- The Skyhawk will go also to the Vietnam

- The Seagull will go Guadalcanal as this campaign is starting to bite my brain.

Next month I´ll be there again at Tomar as Zé Manco still has a big box at home that he didn´t bring last time. 

Next: More Vietnam, mostly vehicles

Able Archer/ RFR rules - Vietnam in 20mm (part 11) - The Mobile Riverine Force

 

The Mobile Riverine Force (MRF) was created in 1967 to counter the VC activities in the Mekong river. These  boats were conversions from the LCM 6 and carried plenty of fire power and had bar armor to protect from the RPGs. The main boat type was the Armored Troop Carrier (ATC).

The MRF was divided into Assault Groups each with around 100 boats of different types capable of transporting one reinforced infantry battalion from the 9th infantry division. The headquarters of these groups was also on water and on board of large LSTs. 

One of the main types was the ATC H (for Helicopter) designed mainly for Medevac. 

Another famous type was the Monitor that would generally lead the column along the rivers. They were heavily armed with 40mm canons, Mk2 mortars and 50 caliber machine guns. Some had M10-8 flamethrowers "Zippo" later on. 

An usual finding in the Mekong was oil, the main reason why the USA... travelled so much around the world. Here this soldier carried as much oil as he could almost drowning on it. 

Of course this story is BS as the black pool is just a way to give some depth to the weapons bay were the Mk2 mortar sits.

Here is another one. The figures are torsos from Esci and the mortars are scratch built. 

The last type of boat is the ATC, the most numerous of all. It could carry up to 40 soldiers and was armed with 20mm canons and 50 caliber machine guns. 

If you don´t want to loose patience doing these things you can have some nice 3d prints already available. The problem for me was that most were from the UK or the US (time + customs problems) or were files from continental Europe and I still don´t have a printer. 

But if you want to loose patience, this is how I did it. The hull was made from wood and its 21cm long (1,5 cm longer than my LCM 3 which was 1,8 meters shorter than the LCM 6).

The control towers were made in hard styrofoam (BlueBoard) and the gun towers are cut down hard rubber chair protections bought in Chinese shops.

Plenty of 3mm card was added for the bar armor, deck and machine covers and ramps. The most troublesome part was to carve horizontally dozens of lines with the X-acto on the side pieces of card in order to simulate the bar protections. The vertical bars are pieces of broom sticks. The life buoys are vinyl pieces. If you want to use Blueboard on your constructions don´t forget to varnish it with PVA glue or acrylic varnish before using your spray primer. 

Next:  more armor for Vietnam

Able Archer/ RFR rules - Vietnam in 20mm (part 10) - First battalions of Vietcong Local Force

 

The Vietcong was organized in two main forces for the wargames table, the Main force, generally the best equipped and that you can see in a previous post, and the Local Force, not as well equipped as it was made of local inhabitants that had to conceal their weapons all the time and dressed mostly in civilian clothes. I made the battalions of VC Local force with six figures per company and only with one mortar per battalion. The figures Orion and Esci (the guys in shorts and the ones with a soft hat with a peak and AK47). 

The left stand had a moon shaped piece of wood glued to the main round base in order to make the prone figure sit more comfortably. The figure with the AK47 and soft "Khmer Rouge" hat was transformed into the woven straw conical hat with the help of Milliput.

The mortars were scratchbuilt as I have very few left. The figures holding cargo in the Local Force Orion box were converted into mortar crews. 

Next: More Vietnam, probably Tango boats or M-113s. 

Able Archer/ RFR rules - Vietnam in 20mm (part 9) - A PBR and a few more US tanks

 

Just a short one for some new goodies. The PBR is a 3d resin print from Frontline Collection Store that you can get from Aliexpress, the M48A3 is MiniGeneral 3d PLA print and the Sheridan is Airfix. 

The PBR boat (of Apocalipse Now fame) is a beautiful, extremely detailed and well packed 3d resin printed model. Some parts are a bit fragile but a strong base around it solve most of those problems. A number of surplus guns and crew were left aside as they will be helpful somewhere else. 

Its not a cheap thing at around 30 euros but surely its a quality model.

The Sheridan tank got the 11th ACR markings as its the US unit I´m trying to make, it has virtually everything you need for ground US forces: the infantry; the M113 ACAV and other variants; the M48A3, the Sheridan and the M109 together with Huey support. 

The Airfix Sheridan is quite basic but with a number of additions it becomes a reasonable model. Years ago I converted a number of them for Kuweit 1991 with 82nd Airborne colors. The wire mesh at the front are 3d resin printed leftovers. 

This M48 is in fact the A2 variant with a lower engine. In order for it to look taller I used plenty of stowage on the engine deck. Apart from this an Airfix M2 Browning was drilled in the top cuppola of the turret. The 1st tank company of three M48s is done. 

Next: The Vietcong Local Force battalions

The USAAF and the RAF in mid/late WW2 for Rapid Fire! rules and in 20mm ...

This one shows the Allied aircraft for both the Pacific and European fronts. Its another collection that mixes decades old models with an Avro Lancaster finished last night. The usual plastic brands are acompanied by Luppa and Altaya die-casts. This post concludes the WW2 aircraft from the major participants as smaller countries like Poland and Slovakia have their aircraft shown while showing the rest of the army.

Resurrected Revell Avro Lancaster in 1/72 for Rapid Fire! rules

 

Many years ago I got a very old Revell Avro Lancaster. The way I got it can´t be remembered, as it was a friend´s gift or it came in a lot of 2nd hand kits bought somewhere in a fair. Its state was appalling as someone had built it using all purpose glue (as we did with our first models) and plenty of parts were missing something I only found out last week. Searching in the web I found this Revell kit as the one from 1982, so over 40 years old, in the mean time retooled in 1994 and again in the 2000s.

The interest of this model for me lies in some heavy bomber support for operations like Goodwood, something I´m around for decades and largely done in terms of models. 

One of the rear tail rudders was gone it was copied in 2mm card dipped in super glue for strenght. The same for the rear wheel which is an Altaya one from an unknown aircraft. 

Several of the Brownings 1919 were missing and replaced by pieces of plastic broomstick.

Two of the propellers were also missing and were replaced by some slightly smaller Matchbox Heinkel He 111 rotors and plastic card blades. 

But the biggest problem was the absence of the big bomb bay. A piece of hard styrofoam was used to fill the hole. A bit of plaster was used in the end to give it a smoother look. 

Next: more Vietnam or a video on the Allied aircraft from mid to late war. 

The Japanese IJA and IJN aircraft in WW2 for Rapid Fire! rules and in 20...

The Japanese airforce of WW2 is an old pleasure of mine and, together with a Tarawa wargames table and a few Japanese tanks and US Amtracks, its the only few things I have for the Pacific. The models are Hasegawa, Fujimi (most of them from the good old days of cheap Japanese models), Airfix, Matchbox, Italeri and Altaya. If you want a detailed post on how I built the Ryujo Aircraft Carrier go to https://jpwargamingplace.blogspot.com

Rapid Fire! IJN Ryujo Aircraft Carrier in 20mm

 

Since finishing the Attacker/Bogue class aircraft carrier I wanted something similar for the Japanese. Maybe because I was around Vietnam models lately the interest of making a Japanese aircraft carrier finally rose. Again the problem of these things is size as they would be several times bigger than this in 1/72nd scale. I chose the Ryujo for being one of the smallest of the 18 different aircraft carriers Japan had in WW2. Smaller then the Ryujo only the Hosho, but this one was kept as a trainer and survived the war with minor damage only to be scraped in 1946. The Ryujo on the other hand was sunk in the battle of Eastern Solomons on the 24th of August 1942. 

The Ryujo was called the "illegal aircraft carrier" as it was built small and light in order to exploit a loophole in the Washington Naval Treaty of 1922. This caused problems as it became top-heavy and its ship-like format at the lower deck made tons of water to enter which caused electrical and engine problems. Like this Ryujo suffered several modifications in 1936-37 and 1939-40.

Making a reasonable card bow on a model ship is always complicated but finally this one came out. The round windows were made with a paper punch on thin card paper. Some necklace thread was used for the anchor. The commander´s cabin became a bit small as I placed the radars a bit above were they should be covering what should have been a larger window area. 

The 23mm dual guns were made from Atlantic HO guns older than me. The crew is also Atlantic and a quick paint job on these Italian modern figures makes the part.  

The same for the much larger 127mm naval guns. Due to laziness I didn´t glue any detail on the cabins and just painted some details. 

The funnels were made from electrical PVC tubing with a plastic grid

The "Airfix" stern had some Airfix dinghies, Airfix WW1 tank wheel parts and an older paint mixer. It was kept simple as its a very complicated area of Ryujo to be made accurately.

In the end this model is 85cm long when it should be 2,5 meters long in 1/72nd scale. Obviously you have to compromise between a reduced model and being kicked out of the house. So these kind of smaller aircraft carriers (and then heavily reduced in RF! style) are the maximum that can be done in wargaming terms. Only the more fortunate of us with endless space can aspire to make Akagi, Shinano or USS Enterprise with around 4 meters each! 

As a proof of the shrinkage effect - if its necessary - the guns on the model are 12 tubes while the original one had 24. 

In fact one of the interesting things about Japanese aircraft carriers was its camouflage. I wanted to portray a carrier with the dazzling effect of Japanese carriers but that turned impossible as, while reading on the subject, I found that only a few of the carriers really had that sort of camouflage. So this one ended grey like the real Ryujo. 

This is the true Ryujo size, something that dwarfs my model. 

I started with a simple layout of the model to calculate the relative position of the gun's bays and other larger details, the landing deck, height and overall design. 

The base and upper upper deck were cut from platex and the two bottom halves were cut from 3 millimeter cardboard. 

The middle deck was placed with the help of two vertical reinforcing squares of cardboard. 

Beams of wood were used for securing the upper deck. 

The life boats were made from pieces of carved blueboard. 

The 127mm guns had the side and support structures made from blueboard. There is one of these guns per box so eight boxes of the heavy artillery set of Atlantic had to be opened and coupled. 

The small radars (in red) were made from whiteboard markers. 

If done today I would have extended the bow some three more centimeters and the upper deck would get two more centimeters in  width. 

Also the lower deck should have had some two centimeters less in height. Even so it became a reasonable model for wargaming. Even if, obviously, will never wargame as intended in the Washington Naval Treaty of 1922 :)

Next: The Japanese aircraft in video