Saturday 25 June 2022

Rapid Fire! France 1940 in 20mm - BMW's and Mercedes for the Germans



German light vehicles arrive at the Ferme des Fenêtres bleues (sorry, I could´t remember anything else) during that fateful month of May 1940. They are BMW R/75 combos and Mercedes-Benz G5 (W152). While the side-cars were a reality in France 1940 not so much for the military G5s which, as far as I could find, was sold to the Hungarian army, used by the German mountain troops but not seen in France. Even so I had these three 3d printed G5 models from MiniGeneral and had to do something with them. As they are relatively similar to other light and medium cars that the German army used in France I pressed these into service and they will be useful as Infantry battalion command cars or OP team carriers. 


The MiniGeneral G5 are simple six part models with my own usual crew made out of plastic torsos and boots with legs and arms made in GreenStuff. 


Now what I really need is a picture of these guys in the Blitzkrieg period valiantly advancing in the midst of the hot spring summer of 1940. Anyone?...


I found these Eskice Miniatures while looking at Aliexpress. A pack has what you see in each row and they are a nice way to introduce some variety in the ranks of our Zvezda combos. The figures are more on the chunky side with bigger heads than Zvezda but at the moment they are all happily living in the same shelve and I had no complains from any of the involved parts. 


One piece resin printings of the finest quality. Just take them out of the blister and paint them! No boring material attached, no printing lines, just lovely models. In their catalog you can find plenty of other models from French motorcyclists to refugees, British paratroopers, Swiss infantry and plenty more.  A true temptation. 
 

One of the prints has the later MG 42, so I carved it out and replaced it with the MG 34 from the Esci soft plastic figures. 
 

Next: probably more Ukraine 2022. 

2 comments:

  1. nice work, do you find the Greenstuff binds well to the plastic of the torsos?

    ReplyDelete
    Replies
    1. Thanks. I apply with the tip of a toothpick a bit of super glue to bind the two materials together. Don´t apply too much as the Greenstuff starts to "swim" on the plastic. In the end, after the GreenStuff is dry, the result is quite strong.

      Delete