Able Archer / RFR rules - Last haul from a 2nd hand fair

 

One of my biggest pleasures, exceptuating the ones were small people are made (or not), is to find old kits that remind me of my childhood. And I think this craze is increasing with the end of the  old style  model shops. So last month I had  news from one of my down town informers (can´t say his name), the one that sells my mother Corin Tellado books, that in Tomar, a city some 70 km from Coimbra (as a side note, Coimbra is still the capital of Portugal, as there is no document of any transfer of capital to Lisbon) a guy nicknamed Zé Manco (Joseph Lame, in english) was selling a large quantity of old plastic models at the 2nd hand fair of Tomar, on the first sunday of each month. So there I was looking for the guy on that day. Not easy as the fair is huge, but I saw a lame guy moving with some difficulty and I was sure to have found my target. 

Among plenty of others, I found these 5 old treasures in perfect conditions:

- The Lancaster will go along with the Revell one I showed a month or so ago just because two is much better than one

- The Sheridan will go to my 11th Black Horse Regiment in Vietnam

- The T-34/85 (had no idea that Polistil made 1/72nd models) with go to the NVA

- The Skyhawk will go also to the Vietnam

- The Seagull will go Guadalcanal as this campaign is starting to bite my brain.

Next month I´ll be there again at Tomar as Zé Manco still has a big box at home that he didn´t bring last time. 

Next: More Vietnam, mostly vehicles

Able Archer/ RFR rules - Vietnam in 20mm (part 11) - The Mobile Riverine Force

 

The Mobile Riverine Force (MRF) was created in 1967 to counter the VC activities in the Mekong river. These  boats were conversions from the LCM 6 and carried plenty of fire power and had bar armor to protect from the RPGs. The main boat type was the Armored Troop Carrier (ATC).

The MRF was divided into Assault Groups each with around 100 boats of different types capable of transporting one reinforced infantry battalion from the 9th infantry division. The headquarters of these groups was also on water and on board of large LSTs. 

One of the main types was the ATC H (for Helicopter) designed mainly for Medevac. 

Another famous type was the Monitor that would generally lead the column along the rivers. They were heavily armed with 40mm canons, Mk2 mortars and 50 caliber machine guns. Some had M10-8 flamethrowers "Zippo" later on. 

An usual finding in the Mekong was oil, the main reason why the USA... travelled so much around the world. Here this soldier carried as much oil as he could almost drowning on it. 

Of course this story is BS as the black pool is just a way to give some depth to the weapons bay were the Mk2 mortar sits.

Here is another one. The figures are torsos from Esci and the mortars are scratch built. 

The last type of boat is the ATC, the most numerous of all. It could carry up to 40 soldiers and was armed with 20mm canons and 50 caliber machine guns. 

If you don´t want to loose patience doing these things you can have some nice 3d prints already available. The problem for me was that most were from the UK or the US (time+ customs problems) or were files from continental Europe and I still don´t have a printer. 

But if you want to loose patience, this is how I did it. The hull was made from wood and its 21cm long (1,5 cm longer than my LCM 3 which was 1,8 meters shorter than the LCM 6).

The control towers were made in hard styrofoam (BlueBoard) and the gun towers are cut down hard rubber chair protections bought in Chinese shops.

Plenty of 3mm card was added for the bar armor, deck and machine covers and ramps. The most troublesome part was to carve horizontally dozens of lines with the X-acto on the side pieces of card in order to simulate the bar protections. The vertical bars are pieces of broom sticks. The life buoys are vinyl pieces. If you want to use Blueboard on your constructions don´t forget to varnish it with PVA glue or acrylic varnish before using your spray primer. 

Next:  more armor for Vietnam

Able Archer/ RFR rules - Vietnam in 20mm (part 10) - First battalions of Vietcong Local Force

 

The Vietcong was organized in two main forces for the wargames table, the Main force, generally the best equipped and that you can see in a previous post, and the Local Force, not as well equipped as it was made of local inhabitants that had to conceal their weapons all the time and dressed mostly in civilian clothes. I made the battalions of VC Local force with six figures per company and only with one mortar per battalion. The figures Orion and Esci (the guys in shorts and the ones with a soft hat with a peak and AK47). 

The left stand had a moon shaped piece of wood glued to the main round base in order to make the prone figure sit more comfortably. The figure with the AK47 and soft "Khmer Rouge" hat was transformed into the woven straw conical hat with the help of Milliput.

The mortars were scratchbuilt as I have very few left. The figures holding cargo in the Local Force Orion box were converted into mortar crews. 

Next: More Vietnam, probably Tango boats or M-113s. 

Able Archer/ RFR rules - Vietnam in 20mm (part 9) - A PBR and a few more US tanks

 

Just a short one for some new goodies. The PBR is a 3d resin print from Frontline Collection Store that you can get from Aliexpress, the M48A3 is MiniGeneral 3d PLA print and the Sheridan is Airfix. 

The PBR boat (of Apocalipse Now fame) is a beautiful, extremely detailed and well packed 3d resin printed model. Some parts are a bit fragile but a strong base around it solve most of those problems. A number of surplus guns and crew were left aside as they will be helpful somewhere else. 

Its not a cheap thing at around 30 euros but surely its a quality model.

The Sheridan tank got the 11th ACR markings as its the US unit I´m trying to make, it has virtually everything you need for ground US forces: the infantry; the M113 ACAV and other variants; the M48A3, the Sheridan and the M109 together with Huey support. 

The Airfix Sheridan is quite basic but with a number of additions it becomes a reasonable model. Years ago I converted a number of them for Kuweit 1991 with 82nd Airborne colors. The wire mesh at the front are 3d resin printed leftovers. 

This M48 is in fact the A2 variant with a lower engine. In order for it to look taller I used plenty of stowage on the engine deck. Apart from this an Airfix M2 Browning was drilled in the top cuppola of the turret. The 1st tank company of three M48s is done. 

Next: The Vietcong Local Force battalions