Tuesday 30 March 2021

Fire&Fury ACW using Epic miniatures for the Western battles (part 4) - Last McLernand Brigades and a few extras for Shiloh



The Shiloh project continues with two more Union brigades, General Grant stand, one more artillery battery and the Indian Mounds. At the moment I managed to finish five Fire&Fury brigades total both Union and Confederate, which used five of the free sprues from the WI magazine. The starter set was open and the resin Meade was turned into Grant but more on that later. 


The commander of this regiment had his arm repositioned for more variety and longer shafts were inserted after drilling in the hands of the flag-bearers for the bigger 15mm Revo flags. 


Marsh and Raith's Brigades, respectively 8 and 10 stands for F&F. 


The gun barrel was also drilled and the crew and wheels switched sides. For that the metal ends of the wheels axis were cut and glued on the insertion hole. Like this the guns looks different when placed side by side with an original one.


In order to make this stand for general Grant, the Meade figure from the starter set was used. For that the bold head of Meade was scalped and replaced by a slouch hat and a waiting artilleryman had the bold head of Meade glued. General Grant was more known for its civilian cut uniform but at least at Shiloh it seems he used the more conventional uniform.


Another view of the man himself.


The flag-bearer with the army pennant is another conversion. I´ve been reading about both Kallistra and Peter Pig having 15mm ACW ranges that are close to the 13,5mm size of the Epic miniatures. But taking advantage of an order for 20mm vehicles from Lancer I also ordered some packs of 10mm command and cavalry ACW figures after looking at their site. The bodies of the cavalrymen looked quite compatible with the Epic range while the horses were on the small size, which was expectable. Like this I glued the torso of this flag-bearer to the horse of a 15mm Irregular Miniatures WW1 French cavalryman which are quite similar in size to the Epic ones. I'm thinking about the same procedure for more figures in command stands namely officers and cornets as nowadays ordering from England is troublesome to say the least. 


I found this smallhill top in a local pet shop in the aquarium section.


Somehow it looks like the Indian Mounds of Shiloh that can be found in the northeast part of the battlefield close to the Tennessee river.

Next: The "Colonial Shermans" for Seelow Heights 1945.

10 comments:

  1. nice little pieces

    One day I want to walk the battlefield of Shiloh.

    cheers
    Matt

    ReplyDelete
  2. Thanks Matt. Never been to the states but my main interest is their civil war battlefields. And NY :)

    ReplyDelete
  3. Those are very nice and shows how easy they are to convert, with the results extremely effective:)

    ReplyDelete
  4. Thanks Steve. Totally agree. I will try some metal heads on them soon.

    ReplyDelete
  5. Nice work. I was thinking these could work for F&F bases.

    ReplyDelete
  6. Thanks Kevin. I think they fit nicely F&F. After cutting the epic bases are 3x2cm pretty close to the F&F 2,5x2cm.

    ReplyDelete
  7. ACW nice subjet. Best minis. 👍👌😎

    ReplyDelete
  8. Obrigado amigo. Já vi melhor pintado e estes olhos também já pintaram melhor.

    ReplyDelete
  9. So you’ve cut the sprues of infantry in half and mounted them onto 30mm by 20mm sized bases yes? Looks great!

    ReplyDelete
    Replies
    1. Yes. My favourite ACW rules are F&F. Another issue is that in my opinion 6cm long bases is not a good Idea for American battlefield filled with trees and broken terrain.

      Delete